What HTTP/2 Means for Ruby Developers
Okay, way too much magical pixie dust
HTTP/2 is coming! No, wait, HTTP/2 is here! After publication in Q1 of 2015, HTTP/2 is now an “official thing” in Web-land. As of writing (December 2015), caniuse.com estimates about 70% of browsers globally can now support HTTP/2. So, I can use HTTP/2 in my Ruby application today, right? After all, Google says that some pages can load up to 50% faster just by adding HTTP/2/SPDY support, it’s magical web-speed pixie dust! Let’s get it going!
Uh, hello Aaron? Yeah, could you like, fix Rack please?
Well, no. Not really. Ilya Grigorik has written an experimental HTTP/2 webserver in Ruby, but it’s not compatible with Rack, and therefore not compatible with any Ruby web framework. While @tenderlove has done some experiments with HTTP/2, Rack remains firmly stuck in an HTTP/1.1 world. While it was discussed that this would change with Rack 2 and Rails 5, very little actually changed. Until the situation changes at the Rack level, Rails and all other Ruby web frameworks are stuck with HTTP/1.1.
Part of the reason why progress has been slow here (other than, apparently, that @tenderlove is the only one that wants to work on this stuff) is that Rack is thoroughly designed for an HTTP/1.1 world. In a lot of ways, HTTP/2’s architecture will probably mean that whatever solution we come up with will bear more resemblance to ActionCable than it does to to Rack 1.0.
Ilya Grigorik, Google’s public web performance advocate, has laid out 4 principles for the web architecture of the future. Unfortunately, Rack is incompatible with most of these principles:
- Request and Response streaming should be the default. While it isn’t the default, Rack at least supports streaming responses (it has for a while, at least).
- Connections to backend servers should be persistent. I don’t see anything in Rack that stops us from doing this at the moment.
- Communication with backend servers should be message-oriented. Here’s one of the main hangups - Rack is designed around the request/response cycle. Client makes a request, server makes a response. While we have some limited functionality for server pushes (see ActionController::Live::SSE), communication in Rack is mostly designed around request/response, not arbitrary messages that can go in either direction.
- Communication between clients and backends should be bi-directional. Another problem for Rack - it isn’t really designed for pushes straight from the server without a corresponding request. Rack essentially assumes it has direct read/write access to a socket, but HTTP/2 complicates that considerably.
When these hurdles are surmounted, HTTP/2 could bring, potentially, great performance benefits to Ruby web applications.
HTTP/2 Changes That Benefit Rubyists
Here’s a couple of things that will benefit almost every web application.
One of the major drawbacks of HTTP 1.1 is that headers cannot be compressed. Recall that a traditional HTTP request might look like this:
accept:text/html,application/xhtml+xml,application/xml;q=0.9,image/webp,*/*;q=0.8 accept-encoding:gzip, deflate, sdch accept-language:en-US,en;q=0.8 cache-control:max-age=0 cookie:_ga=(tons of Base 64 encoded data) upgrade-insecure-requests:1 user-agent:Mozilla/5.0 (Macintosh; Intel Mac OS X 10_11_1) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/47.0.2526.73 Safari/537.36
Cookies, especially, can balloon the size of HTTP requests and responses. Unfortunately, there is no provision in the HTTP 1.x specification for compressing these - unlike response bodies, which we can compress with things like
Huffman coding, duh!
Headers can make up 800-1400KB of a request or response - multiply this to Web Scale and you’re talking about a lot of bandwidth. HTTP/2 will reduce this greatly by compressing headers with something fancy called Huffman coding. You don’t really need to understand how that works, just know this - HTTP/2 makes HTTP headers smaller by nearly 80%. And you, as an application author, won’t need to do anything to take advantage of this benefit, because the compression/decompression will happen at lower levels (probably in Rack or some new layer directly below).
This compression will probably be one of the first HTTP2 features that Rails apps will be able to take advantage of, since header compression/decompression can happen at the load balancer or at the web server, before the request gets to Rack. You can take advantage of header compression today, for example, by placing your app behind Cloudflare’s network, which provides HTTP/2 termination at their load balancers.
Damn, shoulda multiplexed.
Multiplexing is a fancy word for two-way communication. HTTP 1.x was a one-way street - you could only communicate in one direction at a time. This is sort of like a walkie-talkie - if one person is transmitting with a walkie-talkie, the person on the other walkie-talkie can’t transmit until the first person lets off the “transmit” button.
On the server side, this means that we can send multiple responses to our client over a single connection at the same time. This is nice, because setting up a new connection is actually sort of expensive - it can take 100-500ms to resolve DNS, open a new TCP connection, and perhaps negotiate SSL.
Multiplexing will completely eliminate the need for domain sharding, a difficult-to-use HTTP 1.x optimization tactic where you spread requests across multiple domains to get around the browser’s 6-connections-per-domain limit. Instead of each request we want to make in parallel needing a new connection, a client browser can request several resources across the same connection.
I mentioned domain sharding was fraught with peril - that’s because it can cause network congestion. The entire reason the 6-connections-per-domain limit even exists is to limit how much data the server can spit back at the client at one time. By using domain sharding, we run the risk of too much data being streamed back to clients and causing packet loss, ultimately slowing down page loads. Here’s an awesome deconstruction of how domain sharding too much actually slowed down Etsy’s page loads by 1.5 seconds.
One area where Rails apps can take advantage of multiplexing today is by using an HTTP/2 compatible CDN for serving their assets.
HTTP/2 allows clients to express preferences as to which requests should be fulfilled first. For example, browsers can optimize by asking for JS and CSS before images. They can sort of do this today by delaying requests for resources they don’t want right away, but that’s pretty jank and fraught with peril.
Again, your Ruby app can take advantage of this right now by using an HTTP/2 compatible CDN.
HTTP/2 will especially benefit users in high-latency environments like mobile networks or developing countries. Twitter found that SPDY (the predecessor to HTTP/2) sped up requests in high-latency environments much more than in low-latency ones.
HTTP/2 is a binary protocol. This means that, instead of plain text being sent across the wire, we’re sending 1s and 0s. In short, this means HTTP/2 will be easier for implementers, because plain-text protocols are often more difficult to control for edge-cases. But for clients and servers, we should see slightly better bandwidth utilization.
Unfortunately, this means you won’t be able to just
telnet into an HTTP server anymore. To debug HTTP/2 connections, you’re going to need to use a tool that will decode it for you, such as the browser’s developer tools or something like WireShark.
One connection means one TLS handshake
One connection means TLS handshakes only need to happen once per domain, not once per connection (say, up to 6 TLS handshakes for the same domain if you want to download 6 resources from it in parallel).
Rails applications can experience the full benefit of this HTTP/2 feature today by being behind an HTTP/2 compatible web server or load balancer.
How Rails Apps Will Change with HTTP/2
All of the changes I’ve mentioned so far will generally benefit all Ruby web applications - but if you’ll permit me for a minute, let’s dive in to Rails as a specific example of your applications may have to change in the future to take full advantage of HTTP/2.
Primarily, HTTP/2 will almost completely upend the way Rails developers think about assets.
Concatenation is no more
In essence, all HTTP/2 does is make requests and responses cheaper. If requests and responses are cheap, however, suddenly the advantages of asset concatenation become less clear. HTTP/2 can transport a JS file in 10 parts pretty much as fast as it can transport that same file in 1 part - definitely not the case in HTTP/1.x.
But since HTTP/2 makes many-files just as cheap as one-file, that opens up a whole new world of advantages for Rails:
- Development mode will get waaaay faster. In development mode, we don’t concatenate resources, meaning a single page often requires dozens of scripts and css files. HTTP/2 should make this just as fast as a single concatenated file in production.
- We can experiment with more granular HTTP caching schemes. For example, in todays Rails’ world, if you change a single line in your (probably massive) application.js, the entire file will need to be re-downloaded by all of your clients. With HTTP/2, we’ll be able to experiment with breaking our one-JS and one-CSS approach into several different files. Perhaps you’ll split out high-churn files so that low-churn CSS won’t be affected.
- We can amortize large amounts of CSS and JS over several page loads. In today’s Rails world, you have to download all of the CSS and JS for the entire application on the first page load. With HTTP/2 and it’s cheap connections, we can experiment with breaking up JS and CSS on a more granular basis. One way to do it might be per-controller - you could have a single base.css file and then additional css files for each controller in the app. Browsers could download bits and pieces of your JS and CSS as they go along - this would effectively reduce homepage (or, I guess, first-page) load times while not imposing any additional costs when pages included several CSS files.
Server push really makes things interesting
HTTP/2 introduces a really cool feature - server push. All this means is that servers can proactively push resources to a client that the client hasn’t specifically requested. In HTTP/1.x-land, we couldn’t do this - each response from the server had to be tied to a request.
Consider the following scenario:
- Client asks for
index.htmlfrom your Rails app.
- Your Rails server generates and responds with
- Client starts parsing
index.html, realizes it needs
application.cssand asks your server for it.
- Your Rails server responds with
With server push, that might look more like this:
- Client asks for
index.htmlfrom your Rails app.
- Your Rails server generates and responds with
index.html. While it’s doing this, it realizes that
application.css, and starts sending that down to the client as well.
- Client can display your page without requesting any additional resources, because it already has them!
Super neato, huh? This will especially help in high-latency situations where network roundtrips take a long time.
Interestingly, I think some of this means we might need to serve different versions of pages, or at least change Rails’ server behavior, based on whether or not the connection is HTTP/2 or not. Hopefully this will be automatically done by the framework, but who knows - nothing has been worked on here yet.
How to Take Advantage of HTTP/2 Today
If you’re curious about where we have to go next with Rack and what future interfaces might look like in Rails for taking advantage of HTTP/2, I find that this Github thread is extremely illuminating.
For all the doom-and-gloom I just gave you about HTTP/2 still looking a ways off for Ruby web frameworks, take heart! There are ways to take advantage of HTTP/2 today before anything changes in Rack and Rails.
Move your assets to a HTTP/2 enabled CDN
An easy one for most Rails apps is to use a CDN that has HTTP/2 support. Cloudflare is probably the largest and most well-known.
There’s no need to add a subdomain - simply directing traffic through Cloudflare should allow browsers to upgrade connections to HTTP/2 where available. The page you’re reading right now is using Cloudflare to serve you with HTTP/2! Open up your developer tools to see what this looks like.
Use an HTTP/2 enabled proxy, like nginx or h20.
You should receive most of the benefits of HTTP/2 just by proxying your Rails application through an HTTP/2-capable server, such as nginx.
For example, Phusion Passenger can be deployed as an nginx module. nginx, as of 1.9.5, supports HTTP/2. Simply configure nginx for HTTP/2 as you would normally, and you should be able to see some of the benefits (such as header compression).
With this setup, however, you still won’t be able to take advantage of server push (as that has to be done by your application) or the websocket-like benefits of multiplexing.
Want a faster website?
I'm Nate Berkopec (@nateberkopec). I write online about web performance from a full-stack developer's perspective. I primarily write about frontend performance and Ruby backends. If you liked this article and want to hear about the next one, click below. I don't spam - you'll receive about 1 email per week. It's all low-key, straight from me.
The Complete Guide to Rails Performance
Look what I wrote! The Complete Guide to Rails Performance is a full-stack course that gives you the tools to make Ruby on Rails applications faster, more scalable, and simpler to maintain. It includes a 361 page PDF, private Slack, and over 15 hours of video content.Learn more
I've taught over 200 people at live workshops, worked with dozens of clients, and thousands of readers to make their Rails apps faster. What have I learned about performance work and Rails in the process? What makes apps slow? How do we make them faster?
Many Rails developers don't understand what causes ActiveRecord to actually execute a SQL query. Let's look at three common cases: misuse of the count method, using where to select subsets, and the present? predicate. You may be causing extra queries and N+1s through the abuse of these three methods.
I've completed the 'second edition' of my course, the CGRP. What's changed since I released the course two years ago? Where do I see Rails going in the future?
Memory fragmentation is difficult to measure and diagnose, but it can also sometimes be very easy to fix. Let's look at one source of memory fragmentation in multi-threaded CRuby programs: malloc's per-thread memory arenas.
Application server configuration can make a major impact on the throughput and performance-per-dollar of your Ruby web application. Let's talk about the most important settings.
Choosing a new web framework or programming language for the web and wondering which to pick? Should performance enter your decision, or not?
Have you ever wondered how the heck Ruby's GC works? Let's see what we can learn by reading some of the statistics it provides us in the GC.stat hash.
WebFonts are awesome and here to stay. However, if used improperly, they can also impose a huge performance penalty. In this post, I explain how Rubygems.org painted 10x faster just by making a few changes to its WebFonts.
One of the most important parts of any webpage's performance is the content and organization of the head element. We'll take a deep dive on some easy optimizations that can be applied to any site.
New Relic is a great tool for getting the overview of the performance bottlenecks of a Ruby application. But it's pretty extensive - where do you start? What's the most important part to pay attention to?
Your website is slow, but the backend is fast. How do you diagnose performance issues on the frontend of your site? We'll discuss everything involved in constructing a webpage and how to profile it at sub-millisecond resolution with Chrome Timeline, Google's flamegraph-for-the-browser.
rack-mini-profiler is a powerful Swiss army knife for Rack app performance. Measure SQL queries, memory allocation and CPU time.
Most "scaling" resources for Ruby apps are written by companies with hundreds of requests per second. What about scaling for the rest of us?
Ruby apps in the memory-restrictive and randomly-routed Heroku environment don't have to be slow. Achieve <100ms server response times with the tips laid out below.
Caching in a Rails app is a little bit like that one friend you sometimes have around for dinner, but should really have around more often.
Get notified on new posts.
Straight from the author. No spam, no bullshit. Frequent email-only content.